WOD Kapton Tape 2 Mil, Ships Today - Multiple Sizes - Tape Providers

Polyimide Film Tape is a 2 mil electrical grade coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. Available in Multiple Sizes.
Kapton Polyimide Film TapesProduct DescriptionWOD PKT2 Kapton™ Polyimide Film Tape is a 2 mil electrical grade Kapton alternative POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values.WOD PKT2 Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.The Adhesive Employs a proprietary technology that results in extremely low electrostatic discharge at unwind and removal from the PWB. Conventional polyimide tapes can typically generate over 10,000 volts during use which can damage board mounted electronic components. WOD tape PKT2 overcomes this problem without any of the typical drawbacks of conventional "anti-static" or "static-free" tapes (e.g., variable adhesion and opaqueness).Product ApplicationsPrimarily used in electrical insulation and gold finger protection.Protects gold tabs in circuit boards during soldering.Protects surfaces helping reduce replacement partsUsed in electrical applications such as harness/coil wraps & separators, transformers & slot liners where good insulation & heat resistance are required.electrical insulation applications this product does meet class H requirementsTechnical PropertiesAdhesive: High performance siliconeCarrier/Backing: Electrical grade polyimide filmThickness: 3.5 mils (carrier, adhesive)Adhesion: 27.4 ounces per inch (to stainless steel test panel)Tensile Strength: > 36.5 pounds per inch (longitudinal)Dielectric Strength: > 8,000 voltsElongation: > 70%Service/Operating Temperature: up to 392°FSpecification Met: MIL-P-46112B; UL510 approved for flame retardanceCore: 3" DiameterAdditional InformationAlternative to: Electro Tape 95-2; Ideal 9322; T&F 3903; American 304-2; Anchor K-350; Permacel P-222; Taconic 6325-02; Berry Plastics 2345-2; Tesa 4429; Dewal 303-2.Note: Specifications are those given by manufacturers and are not tested for accuracy.

Kapton Polyimide Film Tapes

Product Description

WOD PKT2 Kapton™ Polyimide Film Tape is a 2 mil electrical grade Kapton alternative POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values.

WOD PKT2 Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.

The Adhesive Employs a proprietary technology that results in extremely low electrostatic discharge at unwind and removal from the PWB. Conventional polyimide tapes can typically generate over 10,000 volts during use which can damage board mounted electronic components. WOD tape PKT2 overcomes this problem without any of the typical drawbacks of conventional anti-static or static-free tapes (e.g., variable adhesion and opaqueness).

Product Applications

• Primarily used in electrical insulation and gold finger protection.
• Protects gold tabs in circuit boards during soldering.
• Protects surfaces helping reduce replacement parts
• Used in electrical applications such as harness/coil wraps & separators, transformers & slot liners where good insulation & heat resistance are required.
• electrical insulation applications this product does meet class H requirements

Technical Properties

• Adhesive: High performance silicone
• Carrier/Backing: Electrical grade polyimide film
• Thickness: 3.5 mils (carrier, adhesive)
• Adhesion: 27.4 ounces per inch (to stainless steel test panel)
• Tensile Strength: > 36.5 pounds per inch (longitudinal)
• Dielectric Strength: > 8,000 volts
• Elongation: > 70%
• Service/Operating Temperature: up to 392°F
• Specification Met: MIL-P-46112B; UL510 approved for flame retardance
• Core: 3 Diameter

Additional Information

Alternative to: Electro Tape 95-2; Ideal 9322; T&F 3903; American 304-2; Anchor K-350; Permacel P-222; Taconic 6325-02; Berry Plastics 2345-2; Tesa 4429; Dewal 303-2.

Note: Specifications are those given by manufacturers and are not tested for accuracy.

PSBM Packing Tape, 2 Inch x 110 Yards, 36 Pack, Brown

WOD PFT35GS High Temperature Polyester Green Masking

Tapes Master 2 Rolls - 1/2 x 36 Yds Polyimide High Temperature

2 Roll Polyester High Temperature Masking Tape,PET

FanFlex: Lightweight flexible crests and patches that fold easy. - FanTex: An all-new super comfortable soft fabric. - FanFit: The authentic on-ice

WOD UPVC-24BS Rainbow Produce Poly Bag Sealing Tape (Available in Multiple Colors): 1/2 in. x 180 yds. (Pack of 3)

WOD Kapton Tape 2 Mil, Ships Today - Multiple Sizes - Tape Providers

FanFlex: Lightweight flexible crests and patches that fold easy. - FanTex: An all-new super comfortable soft fabric. - FanFit: The authentic on-ice

Polyimide Tape 2 Mil - Kapton Alternative (70002)

CGS, 2 Mil Dupont Kapton® Tape. High Temperature Heat Tape, UL 510

Tapes Master 2 Rolls - 1/2 x 36 Yds Polyimide High Temperature

FanFlex: Lightweight flexible crests and patches that fold easy. - FanTex: An all-new super comfortable soft fabric. - FanFit: The authentic on-ice

Wod Tape Double Sided Tissue Craft Adhesive Tape 1/2 in. x 55 yd. Gift Wrap, Size: 1/2 inch, Clear

FanFlex: Lightweight flexible crests and patches that fold easy. - FanTex: An all-new super comfortable soft fabric. - FanFit: The authentic on-ice

WOD Kapton Tape 2 Mil, Silicone Adhesive - 36 yards, High Temp. Resistant for Masking and Soldering, No Residue, PKT2

FanFlex: Lightweight flexible crests and patches that fold easy. - FanTex: An all-new super comfortable soft fabric. - FanFit: The authentic on-ice

WOD UHMW-5A Polyethylene Transparent Film Slick Tape, Aggressive Adhesive – 3/4 in X 36 yds (Bulk Case of 48-Rolls) Ideal For Squeak Reduction

CGS, 2 Mil Dupont Kapton® Tape. High Temperature Heat Tape, UL 510

FanFlex: Lightweight flexible crests and patches that fold easy. - FanTex: An all-new super comfortable soft fabric. - FanFit: The authentic on-ice

Kapton Tape - 2 Mil

FanFlex: Lightweight flexible crests and patches that fold easy. - FanTex: An all-new super comfortable soft fabric. - FanFit: The authentic on-ice

WOD Tape Kapton Tape 2 in. x 36 yd. Amber Polyimide High Temperature, Pack of 6