6 Piece Sand Casting Bundle for Metal Casting delft Style Gold Silver Bronze
5 (186) · $ 36.99 · In stock
This Molds item by BlackBarnDesignsGB has 95 favorites from shoppers. Ships from United Kingdom. Listed on Jan 19, 2024
6 Piece Sand Casting Bundle For Metal Casting (Delft Style) Gold Silver Bronze etc
The bundle contains all the items required for small scale metal casting (jewellery or model making), you just need to add metal and heat.
The bundle contains:
- Traditional sand casting flask / mould 2 Pin Type
- 2 Kg of Petrobond Sand
- Crucible (Melting Pot/ Dish) with Wooden Handle
- 50g Borax
- Carbon Stirling Rod 300 mm
- Brass Sprue Forming Mandrel
The two part flask is precision made from cast iron. It allows the easy duplication. The sand casting flask can be filled vertically or horizontally, securely by four locating pins. The void for casting is approximately 115 x 72 x 55mm and weighs approximately 1.25kg. The flask holds the sand when a mould is being made.
Petrobond is a high oil mix bonded sand suitable for non ferrous metals, including gold, silver, aluminium, bronze silicon bronze, manganese bronze, and brass and copper based alloys. The sand produces a fine surface finish and produces comparable results to delft clay, using the same techniques and tools. It can also be used as an alternative to green sand for larger castings and produces near die cast quality casting. The sand can be reused multiple times. The casting sand is supplied vacuum packed in sealed plastic bag.
The cast iron crucible (meting pot/ dish) with pouring lip and wooden and steel handle. The handle can be unscrewed so the cast iron crucible can be use separately. The crucible bowl is 50mm wide x 27mm high. The overall length (with the handle attached) is approximately 305mm and weighs approximately 495g.
Borax Powder is used as a flux when soldering metal (including jewellery) and when metal is melted for casting (including sand/ delft casting and lost wax casting. The addition of borax power reduces oxidisation and improves the metal flow characteristics. For use with gold, silver, bronze, brass, aluminium.
A carbon (graphite) stirring rod for use when melting metals (gold, silver bronze copper & aluminium) for casting. The rods will help to remove impurities from the molten metal during the stirring process. The rod should not be used with platinum as this will contaminate. The rods are made from high density graphite and are 300mm long x 12mm diameter. The rods are brittle and care should be taken when using them.
The Mandrel is length is 50 mm Max diameter 14 mm and 2.95 mm shank. The mandrel is used to form the passage for the liquid metal to pass through.
ALWAYS USE APPROPRIATE SAFETY PROTECTION WHEN HANDLING MOLTEN METAL!
Please see our other listings, including additional Borax and Petrobond sand in various quantities.
Any questions please contact me.
Thanks for looking!
6 Piece Sand Casting Bundle for Metal Casting delft Style Gold
Tml Blacksmith Cast Iron 2-part Flask Mold Frame For Sand Casting
Sand Cast Jewelry
Delft Clay Casting - Sweden
FanFlex: Lightweight flexible crests and patches that fold easy. - FanTex: An all-new super comfortable soft fabric. - FanFit: The authentic on-ice
Sand Casting Set Kit with 2.2 Lbs Delft Clay Sand, Cast Iron Mold Flask Frame, 1 Kg Foundry Graphite Crucible & Tongs Melting Casting Refining Gold
6 Piece Sand Casting Bundle For Metal Casting (Delft Style) Gold
6 Piece Ali No Hole Sand Casting Bundle Metal Casting delft Style
10 Piece Sand Casting Bundle for Metal Casting delft Style Gold
1 Kg of Petrobond Oil Bonded Metal Casting Sand delft Clay Style
Metal Casting Kits - Ireland
Sand Cast Jewelry
6 Piece Sand Casting Bundle For Metal Casting (Delft Style) Gold
30 Pounds Petrobond Sand an Affordable Delft Clay
Wax Sand - Sweden
Sand Casting Molds - UK