EZ-Tex Marine Epoxy Repair Compound

4.9 (182) · $ 26.00 · In stock

$EZ-Tex Marine Epoxy Repair Compound$

EZ-Tex Marine Epoxy Repair Compound Use Above or Below the Waterline • Non-Sag • Waterproof When Cured
EZ-Tex is an easy to use marine epoxy repair compound for use where a high strength, waterproof, permanent repair is needed.

This unique formula creates a tenacious bond to most surfaces - including fiberglass, gelcoat, aluminum, steel, bronze, and wood.
Its buttery consistency will not sag or shrink and is excellent for filling cracks, gouges and voids.
The 1:1 ratio makes mixing easy.
EZ-Tex can be sanded, drilled, tapped, sawed and painted once cured.

EZ-Tex uses —
Protect core materials in decking by creating a waterproof barrier during installations of thru-hull fittings, transducers, cleats, deck fittings, bow rails, hatches, etc.
Create waterproof repairs on metals such aluminum jon boats and pontoons
Fill stripped screw holes and areas where hardware has been pulled out or removed.
Drill and tap repair once hardened
Use in blister repair to fill large voids without sagging or shrinking
Fill unwanted cracks in fiberglass, wood, and other materials - can be easily painted when cured

Features —
Easy to use 1:1 mix ratio repair compound for cracks, gouges, voids and holes
Both components are the same consistency - makes for easy measuring and mixing
High strength formula makes repairs permanent
100% waterproof when cured
Can be used above and below the waterline
Will not sag, shrink or run
Max. working temp once cured is 150°F
Available in 4 oz and 16 oz kits

Heavy on the technical side
(At 50°F)
Pot Life - 2 hr
Gel Time - 4.5 hr
Cure Time - 24 hr

(At 70°F)
Pot Life - 60 min
Gel Time - 90 min
Cure Time - 5.5 hr

(At 90°F)
Pot Life - 45 min
Gel Time - 65 min
Cure Time - 3.5 hr