Forged Gloss Carbon Fiber Black Car Vinyl Wrap Air Release Sticker Sheet Film

4.8 (478) · $ 33.50 · In stock

Arrives by Mon, Feb 5 Buy Forged Gloss Carbon Fiber Black Car Vinyl Wrap Air Release Sticker Sheet Film at

Item Specification:

Thickness of film (C=10 micron): 15C 0.5C

Thickness of film with release liner: 31C 0.5C

Type of film: Hybrid vinyl film with air channels (Designed for vehicle exterior with prefect paint condition)

Glue: Solvent based adhesive, odor: solvent odor (Low-Medium Tack - Easy to reposition)

Release liner: White silicone-coated paper with double-sided polyethylene coating, small square air release channels, origin Germany

Storing period: 2 years if stored in +10С to +20С for optimal quality, relative humidity 50%, in original package, away from direct sun light, clean and dry place

Indoor life: 4 years when followed rules of application and use

Outdoor life: 3 years when followed rules of application and use

Application: from +10С to +20С, usage from -30С to +30С

Dimensional stability: shrinkage less than 5%

Plastification: between 27%-35%

Breaking Strength: 22.7 N/10mm (Average)

Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average)

Test Method: ASTM D3330/D3330-04

Light Ageing in UV Exposure:

Test Method: ASTM D4329-13 Cycle A ISO 105-A02:1993/Cor.2:2005,

Test result: 4-5

Exposure cycle: ASTM D4329-13 cycle A,

Lamp type: UVA-3408h UV at (602.5)℃ BPT, 0.89 W/ (m2nm)@340nm, 5h condensation at (502.5)℃ BPT, Exposure duration: 52h

Description:

Water resistant and weather proof.

Flexible and Stretchable for concave area.

Low cost to change the look of your vehicles.

Easy installation with dry application method.

Heat gun or household blow dryer for shaping is required.

Low - medium tack self adhesive (Easy to Reposition)

Easy to fit in most tight spots or corners (3M primer 94 is requireed for non sticky surfaces, curves corners)

Material has no warranty for fading. Fluorescent Neon colors tend to fade faster than normal colors. Fading can be reduced with over lamination, preventing stretched areas, which fade even faster, and shelter from high U.V. times during the day.

Material is specially made for vehicle exterior paint surface in good condition. Buyers take self responsibility on unsuccessful result on other usage.

Always pre-test vinyl installation on vehicles.

Due to different monitors/calibrations, colors may vary slightly from the pictures.

Film colors can vary slightly from roll to roll. For the most consistency, please purchase a full roll.

For best result, professional installation is required; Buyers take responsibility on physical damage during installation such as over heating, over stretching, ripping.

This vinyl is designed for vehicle exterior wrap use ONLY. This vinyl wont stick good on polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, plastic, textured, aluminum, metal. Installers must use 3M primer 94 for additional adhesion. This vinyl is not originally designed for plotter or cutter use. Buyer is responsible for all of the wrinkles creases issue if using on a plotter or cutter.

Gloss Forged Carbon (RCF08) Vinyl Wrap

3D Matte Black Carbon Fiber Vinyl Wrap – RAXTiFY

Forged Gloss Carbon Fiber Black Car Vinyl Wrap Air Release Sticker

Self Adhesive Cotton Sticker Waterproof JDM Car Modification AB Pillar Ceiling Repair Decor Japanese Samurai Style Sticker DIY Refit - in 2023

Matte Dark Forged Carbon (RCF09M) Vinyl Wrap

Premium Black Satin Forged Carbon Fiber Vinyl Wrap Roll With - Temu

Forged Carbon Fiber Wrap FOR SALE! - PicClick

Gloss Dark Forged Carbon (RCF09) Vinyl Wrap, 58% OFF

Wrapped Car

Highest Quality Super Glossy Forged Carbon Vinyl Wrap Roll Adhesive Forged Car Wrapping Decal with PET Air Release Liner - AliExpress

NEW HD Holographic Laser Gloss Forged Carbon Vinyl Car Wrap Film With Air Release Like 3M Quality Initial Low Tack Glue 1 52x18m259n From Doer69, $392.38