Greystone Gel Stain & Topcoat-32 oz. – Picker Paint

4.8 (666) · $ 28.50 · In stock

Gel Stain is a protective urethane topcoat pigmented with a bit of colored stain

Greystone –lightly pigmented, this translucent warm grey color is reminiscent of stone.

The tinted color easily hides imperfections and scratches
This is Fusion Mineral Paint’s toughest of the topcoats
Useful to tone existing wood color
A one-step application
Stir, stir, stir and stir-5 minutes of stirring before using to get it’s settled matte thoroughly mixed-DO NOT SHAKE-it will add air bubbles
Apply to any surface that is free of grease, wax, dirt, shellac or dust
Do not use on vinyl, shellac, asphalt or linoleum
Brush on with natural bristle brush or use microfiber roller to apply!
Do not use applicator pad or foam roller to apply
Oil based -use mineral spirits for clean up
No sanding or de-glossing surface before using
Ideal for heavily used interior surfaces
Use on areas that are frequently washed-table tops, bathroom or kitchen countertops
Extremely durable to refinish old hardwood floors
When using on raw wood surfaces-first coat should be 1:4 mineral spirits to Gel Stain
Topcoat resists water, food stains, alcohol, grease and detergents
Adheres to difficult surfaces like laminate, melamine, lacquered or painted or coated surfaces.
Use to create an antiquing effect
May be recoated after 8 hrs.
Once your coat is layered on, avoid re-touching the wet surface!
Fully cures in 5 days
Self leveling
One coat looks like a stain.
Thickness of Gel stain out of the can varies between the 4 colors-some are thick and some are thinner
Your base substrate color will always show through, but the more coats, the more opaque it becomes
Satin finish
Dry time between coats-approx. 4 hrs.
Cure time is 5 days

Gel Stain is a protective urethane topcoat pigmented with a bit of colored stain Greystone –lightly pigmented, this translucent warm grey color is reminiscent of stone. The tinted color easily hides imperfections and scratches This is Fusion Mineral Paint’s toughest of the topcoats Useful to tone existing wood color A one-step application Stir, stir, stir and stir-5 minutes of stirring before using to get it’s settled matte thoroughly mixed-DO NOT SHAKE-it will add air bubbles Apply to any surface that is free of grease, wax, dirt, shellac or dust Do not use on vinyl, shellac, asphalt or linoleum Brush on with natural bristle brush or use microfiber roller to apply! Do not use applicator pad or foam roller to apply Oil based -use mineral spirits for clean up No sanding or de-glossing surface before using Ideal for heavily used interior surfaces Use on areas that are frequently washed-table tops, bathroom or kitchen countertops Extremely durable to refinish old hardwood floors When using on raw wood surfaces-first coat should be 1:4 mineral spirits to Gel Stain Topcoat resists water, food stains, alcohol, grease and detergents Adheres to difficult surfaces like laminate, melamine, lacquered or painted or coated surfaces. Use to create an antiquing effect May be recoated after 8 hrs. Once your coat is layered on, avoid re-touching the wet surface! Fully cures in 5 days Self leveling One coat looks like a stain. Thickness of Gel stain out of the can varies between the 4 colors-some are thick and some are thinner Your base substrate color will always show through, but the more coats, the more opaque it becomes Satin finish Dry time between coats-approx. 4 hrs. Cure time is 5 days