Printers Jack Iron-On Dark Color Heat Transfer Paper 8.3x11.7 inch - 10 sheets

4.9 (215) · $ 9.00 · In stock

Arrives by Mon, Jan 29 Buy Printers Jack Iron-On Dark Color Heat Transfer Paper 8.3x11.7 inch - 10 sheets at

Inkjet Dark Color Transfer Paper

Introduction
1. Used on the Dark Color Cotton or Nylon Fabrics(more than 60% cotton content, the best transfer effect).
2. Please store the paper in a cool, dry place.

Printing Instructions
1. Print design on the paper with the correct orientation(frontal printing)panel.
2. Print the image on the coated film(soft side) of the paper.
3. Check the printer setting, single-sheet feeding is recommended.
4. Use the normal print setting when preparing for print. No need to oversaturate with ink.
5. When you put the paper into the printer, please ensure that the paper is flat.
6. After printing, let the paper be dry.

Transferring Instructions
1. Put the heat press transfer machine on a hard surface.
2. Place the fabric on the work table of the machine, please ensure that the fabric is flat.
3. Close the clamshell of the heat press transfer machine to test the pressure, adjust the pressure to a little heavy, then open the clamshell.
4. Open the switch of the machine, set the time and the temperature you need. Then wait until the time and the temperature reach the value you had set.
5. Cut the paper for the shape you need, then peel the printed film of the paper.
6. Place the printed film of the paper onto the fabric, the side with the image should be upward(frontal placement). The printed film and the fabrics should be flat when you put printed film on the fabric.
8. Put one sheet of the protective paper on the printed film.
9. Close the clamshell of the machine, when the transfer is done, the machine will make a alarm.
10. Open the clamshell of the machine, wait for a moment to let the paper and the fabric cool down a little. Then peel off the protective paper.

Suggested Time&Temperature
Time: 25-30 seconds
Temperature: 329-365℉(165-185℃)
Pressure: Heavy