8.5x5.5 Rolling Tray Silicone Mold (Weed Leaf) – JussCraftinAround

This Tray mold is made from soft, tear resistant, very low long term shrinkage silicone. It is great or casting wax, gypsum, resins, concrete and other materials and is heat resistant up to 450°F. Any bubbles located on the bottom of the mold due to the fact that this silicone does not require vacuum degassing, and wil

This Tray mold is made from soft, tear resistant, very low long term shrinkage silicone. It is great or casting wax, gypsum, resins, concrete and other materials and is heat resistant up to 450°F. 
Any bubbles located on the bottom of the mold due to the fact that this silicone does not require vacuum degassing, and will not affect the inside of the mold or the finished product

The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold can be gently cleaned with a soap solution and rinsed with water. Rubbing the mold repeatedly or with things such as fabric and paper towels  can cause scratches to the shine which will cause imperfections in the details. Molds should be stored on a level surface in a cool, dry environment. 

HEAT

Most artists apply heat to pop bubbles in resin once it has been poured, doing this can be harmful to your silicone mold. It can and WILL burn the resin and can damage  the mold as well. The resin can burn and fuse to the silicone and if the silicone is damaged, it will cause imperfections in the finished product or cause the heated resin to stick to the silicone mold, damaging the mold itself.  If you want to pop the bubbles do so with a torch or heat gun before putting it into the mold. 

All molds are made to order, brand new and never used.  Once orders are placed, it takes 7-10 days to process. 

While no resin is considered food safe, please read your resin instructions and follow their guidelines when using products made from resin. 

MOLDS ARE MADE TO ORDER AND ARE NOT RETURNABLE OR REFUNDABLE ONCE USED. 
Please inspect mold prior to use. Molds are NON returnable/refundable once used. If Mold is damaged prior to use, it may be returned and I will inspect it.  If it is determined that it was a defect prior to shipping, mold will be replaced or refunded (minus shipping costs).

Finished piece once demolded will measure 8.5x5.5   inches  

This Tray mold is made from soft, tear resistant, very low long term shrinkage silicone. It is great or casting wax, gypsum, resins, concrete and other materials and is heat resistant up to 450°F. Any bubbles located on the bottom of the mold due to the fact that this silicone does not require vacuum degassing, and will not affect the inside of the mold or the finished product The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold can be gently cleaned with a soap solution and rinsed with water. Rubbing the mold repeatedly or with things such as fabric and paper towels  can cause scratches to the shine which will cause imperfections in the details. Molds should be stored on a level surface in a cool, dry environment.  HEAT Most artists apply heat to pop bubbles in resin once it has been poured, doing this can be harmful to your silicone mold. It can and WILL burn the resin and can damage  the mold as well. The resin can burn and fuse to the silicone and if the silicone is damaged, it will cause imperfections in the finished product or cause the heated resin to stick to the silicone mold, damaging the mold itself.  If you want to pop the bubbles do so with a torch or heat gun before putting it into the mold.  All molds are made to order, brand new and never used.  Once orders are placed, it takes 7-10 days to process. While no resin is considered food safe, please read your resin instructions and follow their guidelines when using products made from resin.  MOLDS ARE MADE TO ORDER AND ARE NOT RETURNABLE OR REFUNDABLE ONCE USED.  Please inspect mold prior to use. Molds are NON returnable/refundable once used. If Mold is damaged prior to use, it may be returned and I will inspect it.  If it is determined that it was a defect prior to shipping, mold will be replaced or refunded (minus shipping costs). Finished piece once demolded will measure 8.5x5.5   inches  

FanFlex: Lightweight flexible crests and patches that fold easy. - FanTex: An all-new super comfortable soft fabric. - FanFit: The authentic on-ice

Vusnud Rolling Tray Resin Mold, Large Silicone Epoxy Resin Mold Tray, Epoxy Molds for Resin Casting

8.5x5.5 Rolling Tray Silicone Mold (Weed Leaf) – JussCraftinAround

FanFlex: Lightweight flexible crests and patches that fold easy. - FanTex: An all-new super comfortable soft fabric. - FanFit: The authentic on-ice

Large Rolling Tray Molds

Smoker Set Mold Weed Rolling Tray Silicone Mold Pot Leaf Ashtray

FanFlex: Lightweight flexible crests and patches that fold easy. - FanTex: An all-new super comfortable soft fabric. - FanFit: The authentic on-ice

LET'S RESIN Resin Mold Silicone Kit with Resin Rolling Tray Mold, Ashtray Resin Jar Mold with Lid for Casting Resin,Epoxy Resin,DIY Storage Container

8.5x5.5 Rolling Tray Silicone Mold (Weed Leaf) – JussCraftinAround

FanFlex: Lightweight flexible crests and patches that fold easy. - FanTex: An all-new super comfortable soft fabric. - FanFit: The authentic on-ice

Ashtray Mold for Resin, Large Leaf Silicone Mold for Epoxy Resin, Maple Leaf Rolling Tray for Jewelry Storage Box, DIY Craft Gift, Home Decoration

8 x 5 inch Tray Silicone Mold – JussCraftinAround

Custom Silicone Injection Molds, Marijuana Candy Molds

8.5x5.5 Rolling Tray Silicone Mold (Weed Leaf) – JussCraftinAround

Large Rolling Tray Molds - Silicone Tray Molds,Epoxy Resin Molds

Rolling Tray Molds for Resin, Thrillz Large Silicone

Large Rolling Tray Molds - Silicone Tray Molds,Epoxy Resin Molds

8.5x5.5 Rolling Tray Silicone Mold (Weed Leaf) – JussCraftinAround

FanFlex: Lightweight flexible crests and patches that fold easy. - FanTex: An all-new super comfortable soft fabric. - FanFit: The authentic on-ice

1pc Rolling Tray Resin Mold Silicone Molds For Resin Tray Rolling Tray Molds Maple Leaf Leaves Silicone Mold For Epoxy Resin Craft DIY Candle Holder