Titebond Extend Wood Glue - 5 Gallon, 9107 (Franklin International)
4.6 (116) · $ 68.00 · In stock
Versatile: Bonds wood, particleboard, MDF, plywood and other porous materials. Ideal for complex assemblies and bent laminations.
Titebond Extend Wood Glue is a slower setting version of Titebond Original Wood Glue. It offers superior performance in a broad range of applications, including edge and face gluing. It is particularly useful in complex operations such as curved railings and other assemblies that require more time to align. Titebond Extend develops a bond stronger than wood itself, offers excellent sandability and is unaffected by finishes. It is compatible with all common species of wood, as well as particleboard, MDF, plywood and other porous materials.
Slower speed of set - Longer working time
Excellent heat-resistance
Water cleanup & non-toxic
Versatile - Bonds wood, particleboard, MDF, plywood and other porous materials
Ideal for complex assemblies and bent laminations
Physical Properties (Typical)
Type: Aliphatic Resin
State: Liquid
Color: Yellow
Dried film: Yellow
Solids: 42%
Viscosity: 3,500 cps
pH: 4.8
Calculated VOC: 3.12 g/L
Weight/gallon: 9.7 lbs.
Chalk temperature*: Approx 40°F
Flash-point: >200°F
Freeze/thaw stability: Stable
Storage life: 12 months in tightly closed containers below 70°F
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.
Application Guidelines
Application Temperature: Above 40 °F
Open assembly time: 15 minutes (70°F. / 50% RH)
Total assembly time: 20 to 25 minutes (70°F. / 50% RH)
Minimum required spread: 6 mils (typical), or 250 square feet per gallon.
Required clamping pressure: Enough to bring joints tightly together (generally 30-80 psi for High Pressure Laminate, 100-150 psi for softwoods, 125-175 psi for medium woods, and 175-250 psi for hardwoods)
Methods of application: Plastic bottles for fine applications; glue may also be spread with a roller spreader, or brush.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Bonding Strength (ASTM D-905 Test with Hard Maple)
Temperature
Strength
Wood Failure
Room Temperature
3,510 psi
81%
150°F. Overnight
3,120 psi
61%
Limitations
Titebond Extend Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Extend. Not for structural of load bearing applications. Do not use when temperature, glue or materials are below 40°F. Freezing may not affect the function of the product but may cause it to thicken. If product appears to have settled, stir to ensure uniformity. It is recommended that Titebond Extend Wood Glue not be stored for extended periods at temperatures lower than 40°F. Note: Stir before use to ensure uniformity. Read MSDS before use. Keep from freezing. Keep out of reach of children.
Available Sizes
Part #
Size
UPC
Case Qty.
9104
16 Oz. Bottles
037083091045
12
9106
Gallon Jug
037083091069
2
9107
5 Gallon Bucket
037083091076
1
9108
55 Gallon Drum
N/A
1
Adhesives, Caulks and Fillers - Glues and Adhesives
Titebond Franklin International 5005 II Premium Wood Glue, 1 Gal
Franklin 4137, 5 Gallon Titebond II Extend Wood Glue, Off White Color, Dries Cream
FanFlex: Lightweight flexible crests and patches that fold easy. - FanTex: An all-new super comfortable soft fabric. - FanFit: The authentic on-ice
Franklin International F9107 5-Gallon Titebond Original Extend Wood Glue
FanFlex: Lightweight flexible crests and patches that fold easy. - FanTex: An all-new super comfortable soft fabric. - FanFit: The authentic on-ice
Franklin International 6123 Titebond Trans Glue, 8-Ounce
Titebond 5 Gal Original Wood Glue - 5067
Titebond 5 Gal Original Wood Glue - 5067
Titebond
Titebond III Ultimate Wood Glue - ProJug, 14109 (Franklin International)
Titebond 5 Gal Original Wood Glue - 5067